PIC18F4550 USB MICROCONTROLLER

PIC18F4550 Flash 40-pin 32kB 48MHz Microcontroller (Microchip)

Specifications

1. 40-pin Low Power Microcontroller
2. Flash Program Memory: 32 kbytes
3. EEPROM Data Memory: 256 bytes
4. SRAM Data Memory: 2048 bytes
5. I/O Pins: 35
6. Timers: One 8-bit / Three 16-Bit
7. A/D Converter: 10-bit Thirteen Channels
8. PWM: 10-bit Two Modules
9. Enhanced USART: Addressable with RS-485, RS-232 and LIN Support
10. MSSP: SPI and I²C Master and Slave Support
11. External Oscillator: up to 48MHz
12. Internal Oscillator: 8MHz

Feature

Power Management

Feature

s

1. Run: CPU on, Peripherals on
3. Idle: CPU off, Peripherals on
5. Sleep: CPU off, Peripherals off
7. Idle mode Currents Down to 5.8 μA Typical
9. Sleep mode Current Down to 0.1 μA Typical
11. Timer1 Oscillator: 1.1 μA, 32 kHz, 2V
13. Watchdog Timer: 2.1 μA,32 kHz, 2V Typical
15. Two-Speed Oscillator Start-up

Flexible Oscillator Structure:

1. Four Crystal modes, up to 48 MHz
3. Internal Oscillator Block:
5. 1. 8 user-selectable frequencies, from 31 kHz to 8 MHz
   4. User-tunable to compensate for frequency drift
7. Secondary Oscillator using Timer1 @ 32 kHz
9. Fail-Safe Clock Monitor:
11. 1. Allows for safe shutdown if peripheral clock stops

Peripheral Highlights:

1. High-Current Sink/Source 25 mA/25 mA
3. Three Programmable External Interrupts
5. Four Input Change Interrupts
7. Up to 2 Capture/Compare/PWM (CCP) modules, one with Auto-Shutdown (28-pin devices)
9. Enhanced Capture/Compare/PWM (ECCP) module (40/44-pin devices only):
11. 1. One, two or four PWM outputs
    4. Selectable polarity
    7. Programmable dead time
    10. Auto-shutdown and auto-restart

Peripheral Highlights (Continued):

1. Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all 4 modes) and I2C™ Master and Slave modes
3. Enhanced Addressable USART module:
5. 1. Supports RS-485, RS-232 and LIN/J2602
   4. RS-232 operation using internal oscillator block (no external crystal required)
   7. Auto-wake-up on Start bit
   10. Auto-Baud Detect
7. 10-Bit, up to 13-Channel Analog-to-Digital (A/D)
9. Converter module:
11. 1. Auto-acquisition capability
    4. Conversion available during Sleep
13. Dual Analog Comparators with Input Multiplexing
15. Programmable 16-Level High/Low-Voltage
17. Detection (HLVD) module:
19. 1. Supports interrupt on High/Low-Voltage Detection

Special Microcontroller

Feature

s:

1. C Compiler Optimized Architecture:
3. 1. Optional extended instruction set designed to optimize re-entrant code
5. 100,000 Erase/Write Cycle Enhanced Flash Program Memory Typical
7. 1,000,000 Erase/Write Cycle Data EEPROM Memory Typical
9. Flash/Data EEPROM Retention: 100 Years Typical
11. Self-Programmable under Software Control
13. Priority Levels for Interrupts
15. 8 x 8 Single-Cycle Hardware Multiplier
17. Extended Watchdog Timer (WDT):
19. 1. Programmable period from 4 ms to 131s
21. Single-Supply 5V In-Circuit Serial Programming™ (ICSP™) via Two Pins
23. In-Circuit Debug (ICD) via Two Pins
25. Wide Operating Voltage Range: 2.0V to 5.5V
27. Programmable Brown-out Reset (BOR) with Software Enable Option

• SKU: DBS 199, TMD10,Th5,KRT
• /
• Category: Semiconductor Components & ICs
• /
• Tags: PIC18F4550 USB MICROCONTROLLER