Trans-Auto Automatic Genset Controller from EMKO provides automatic start and stop the engine and protect the generator system. Both automatic and manual control is possible. A test mode is also available which allows the generator to be run for checking the generator system. This AGC Generator Controller has Dual Working feature. In the event of a remote start, group with high priority starts and takes the load. If both groups has no priority, the group with less working hour will start and take the load. To use Dual Working feature Dual Set expansion module must be used.
SPECIFICATIONSLCD Languages English/Chinese, English/Deutch, English/Turkish, English/Italiano, English/Espanol, English/Francais, English/Russian Inputs 6x Configurable digital, 4x Analogue senders, 1x Cabinet temperature, Magnetic Pickup, Charge Alternator D+(WL) inputs Outputs Konfigüre edwithbilir 2x Röle, 4x Transistörs, Jeneratör kontaktör çıkışı Current Measurement Configurable 2x Relays, 4x Transistors, GBR outputs Voltage Measurement 3 phases for Alternator Case Dimensions 229mm x 152mm x 41mm Protection Class NEMA 4X IP65 ön panel Operating Range DC Battery Supply range 8 to 32Vdc, max.operating current is 360mA Sender Measurement 0 to 1300 ohm, accuracy: 1%FS, resolution: 1 ohm Cabin.Temp.Measuremet -50 ... +100 ºC, Accuracy: 1 % FS, resolution: 1 ºC. Operating / Storage Temp. -20°C with +70°C / -40°C with +80°C Expansions GPRS Trans-GPRS , Trans-Web_GPRS Embedded WEB server Trans-Web_Ethernet Serial ModBus Trans-Messenger.485 module Approvals CE, GOST-R
- Canbus J1939 ECU communication
- Selectable second language
- Generator phase sequence control
- Power factor measurement for 3 phases
- Selectable Resistive sender types; Pt-100, VDO, US, GM, Ford, Datcon, etc..
- SPN, FMI and OC values reading from engines via J1939
- Active, Reactive, Apparent power measurement